Beer canning line
The design of the beer can filling and sealing 12-1 machine combines the actual situation after the introduction and absorption in China.
The filling system consists of a filling valve (exhaust valve), a filling tank, a liquid level control device, a filling valve lifting cylinder, and a filling tank height adjusting device.
The filling valve assembly includes a liquid valve, a rear (Note) air pipe, an air valve, a centering hood, a lifting mechanism, and an exhaust valve.
Empty cans enter the tank through the star wheel into the filling machine.
The canned stuffing is sent to the sealing machine of the positioning head through the hook chain, and the lid is sent to the tank mouth by the feeding device and the pressing head. When the tank body care rises, the pressure head presses the tank mouth, Pre-seal, and then seals the first A real closed tank, the tank is sent through the sealing machine.
|Number of Filling valve ：||12|
|Number of sealing valve：||1|
|Power of machine：||3KW|
|CO2 content of filling products||〈5(Beer)|
|Maximum filling pressure||0.5 Mpa|
|Compressed air consumption：||1.2m3/h(0.3Mpa)|
|Sterile air consumption：||1.8m3/h(0.4Mpa)|
|Weight of machine||About 900kg|
|Size of the machine||1950×1350×2000mm|
Accessory equipment for beer canning line:
1. Forklift transports and puts the pallet which is stacked fully of the empty cans on the conveyor. Then the conveyor transports it on the lift platform;the motor of the conveyor is controlled by the transducer. The conveying is activated slowly from halt state to avoid the danger of empty cans
dumping because of sudden activating.
2.Pallet positioning device senses the correct position when the empty cans come into main lift platform and come down when finish depalletizing
by a positioning device making use of level principle and microswitch.
It is used to clean empty can in canning production line. Empty cans will be sent to turning device first, which will be turned around then transferred into rinsing machine. Empty can will be running from top to bottom along the turning device. When empty cans enter into rinsing machine, they will be cleaned by 80℃ hot water (provided by customer) to reach aseptic state of can. There is certain inclination angle in both sides of rinser, whose size could be adjusted properly when needed. Empty cans will be rolling in parallel way from top to end; the waste water will be discharged from outfall.
Stainless steel type, easy to install and use.
Can filling and sealing 2-1 unity machine:
Beer can filling-sealing 2-1 machine is a filling sealing 2 in 1 machine designed combined with the actual situation in our country after the introduction and absorption.
This spray warm and cooling machine also named tunnel pasteurizer.
Liquid and its package are heated to the required sterilization temperature and maintained at that temperature for some time, and then down to
Liquid level detector:
When the filling volume can not match the standard, the machine will remove the cans automatically to ensure the quality of the products.
1. This machine is applicable for drying the cans/bottles before labelling.
2. The wind direction is adjustable. The wind mouth can also be adjusted according to actual situation.
3. Almost every kind and size of bottles can be dried by this machine.
4. Low energy cost.
5. No easy-wear accessories or parts.
1．Whole machine adopt qualified stainless steel and good-quality of aluminum alloy , compact and reasonable fracture，convenient to adjust
2．Simply installation, then can convenient for round can.
3．No need of instrument, rotary mechanism is convenient to adjust, apply to different can type.
4．Middle guide-pole clip system, mould changing quickly, no need any instrument.
5．Automatic blanking, automatic labeling, there is no need of people.
Equipped with vacuum ink recycle system to reduce the consumption of the ink, small occupation. Self-adjust when there's break, to confirm the best printing effect.
Plactic film shrinking wrapping machine:
This machine includes two parts, one is for cutting, another part is for shrinking packaging.