12 heads cans beer Isobaric filling machine
Model 12-1 Automatic Filling Machine is specially designed for medium and large capacity brewery.Adopt the principle of reverse pressure filling.Fast filling speed, high accuracy of liquid level, only when there is a can to start filling, otherwise do not fill.The work is reliable.
1. Connect beer, compressed air and Co2.
2. Turn the valve 1 to the position " down", and the cylinder goes down.
3. Turn the valve 2 to the position " pressurize" .
4. Observe the pressure value of the pressure gauge 4, set the pressure value a little lower than the fermenting tank pressure. For example, if the fermenting tank pressure is 0.15 MPA, please set the pressure gauge value as 0.11-0.12 MPA.
Item Production capacity Filling method Material Dimensions
HG-4-1(Semi)100-300CPH Isobaric filling SUS304 1800*750*2200mm
HG-4-1(Fully)500-700CPH Isobaric filling SUS304 700*800*1800mm
HG-12-1 1500-2000CPH Isobaric filling SUS304 2150*1300*1900mm
- Filling valve adopts high precision mechanical filling valve, no bottle, no vacuum mechanism.
- External mechanical valve structure, no spring and seal in the valve body.
- Available in two vacuum capacities and equipped with high pressure foaming unit.
- The drive is driven by an open gear and a transmission.Adopt frequency conversion stepless speed regulation, the speed range is large.
- Motor and chassis must be grounded, neutral wire and ground wire must be separated;
- The power input line of the beer filling machine must be introduced through the leakage switch;
- Pneumatic three parts need special pneumatic lubricating oil, in order to extend the service life of the cylinder;
- The pump is strictly prohibited to work in water.