Carbonated drink can filling and sealing unit machine
This machine is suitable for filling and capping carbonated soft drink. It is equipped the advanced device, electrical equipment, and pneumatic control technology. It has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss. It can be equipped long-distance control system. It is the preferred equipment for the medium beverage plant.
• Wholly sealed widow structure which is beautiful, concise, easy and highly operated;
• Cycling tank design with precision polishing inside;
• High precision and large flow rate filling valves to meet productive requirement;
• Specially designed roller structure which is easy to be adjusted, locked and ensure sealing function;
• Friendly and convenient operating panel with high expansibility.
• The filling valve adopts high precision mechanism valve, fast speed filling, and high precision liquid level.
• The filling vat adopts 316L material designed sealing vat, to achieve constant pressure filling.
• The flow rate of the filling valve>125ml/s.
• Main transmission adopts toothed belt and gearbox open-type transmission assemblies, high efficiency, and low noise.
• The main drive adopts step-less speed change for frequency conversion, the whole machine adopts PLC control; the capping machine and filling machine adopts coupling joint, to ensure synchronization of two machines.
• With filling with can, no filling without can.
• The filling manner is constant pressure filling, with fast filling speed and stable action.
• Adopting introduce into full set of Switzerland (Ferrum) capping technology.
• Capping trolley adopts high hardness alloy steel quench(HRC＞62), capping curve adopts projection grinder precision machining, to ensure the quality of capping.
• With capping with can, no capping without can control system, to ensure the normal running of the machine.
• With CIP automatic rinsing function.
• With centralized lubrication system.
This machine is specially design for empty cans. It carries the empty cans by layers onto the accumulations table so as to send the cans to the canning line.
It is used to clean empty can in canning production line. Empty cans will be sent to turning device first, which will be turned around then transferred into rinsing machine. Empty can will be running from top to bottom along the turning device. When empty cans enter into rinsing machine, they will be cleaned by 80℃ hot water (provided by customer) to reach aseptic state of can. There is certain inclination angle in both sides of rinser, whose size could be adjusted properly when needed. Empty cans will be rolling in parallel way from top to end; the waste water will be discharged from outfall.
This spray warm and cooling machine also named tunnel pasteurizer, which is different from the direct heat method (instantaneous sterilization), tunnel pasteurizer sterilize products and containers together, so that you can eliminate various possible causes of the growth of harmful bacteria within the allowed time.
Liquid level detector:
This liquid level detector is matching for the automatic canning line to fill beer. When the filling volume can not match the standard, the machine will remove the cans automatically to ensure the quality of the products.
1. This machine is applicable for drying the cans/bottles before labelling.
2. The wind direction is adjustable. The wind mouth can also be adjusted according to actual situation.
3. Almost every kind and size of bottles can be dried by this machine.
4. Low energy cost.
5. No easy-wear accessories or parts.
1. Suitable for a round bottlefront, back and neck label, flat and round bottles, single sided labeling, such as flat shampoo bottles and flat bottles of lubricating oil, liquid soap round bottle, wine bottle, etc.
2. Double the efficiency, which are widely used in chemical, cosmetics, petrochemical, pharmaceutical and other industries.
1. Equipped with vacuum ink recycle system to reduce the consumption of the ink, small occupation. Self-adjust when there's break, to confirm the best printing effect.
2. Easy to operate.
3. This machine would print in many different languages.
4. Display the product code, batch, etc.
5. Bold the characters as much as 9 times.
6. It can print 3 lines, numbers and other characters in English version.
|Plactic film shrinking wrapper|