Product Application semi automatic beer bottle filling machine
Introducing the Germany technology and according to the characteristics of beer production industry, this bottling machine is designed as a small-size beer filling machine for most small brewery. This machine is of good functions such as stable operating, full and well rinsing, filling, capping and sterilizing.
1. No bottle, no filling.The machine only starts to fill when there is bottle, because there is sensor to check the bottle. It will avoid the waste of the bottle and liquid. The rate of the broken bottle is less than 1%-1.5% and the waste of the liquid is less than 2%.
2. Easy change, save time. It can be suitable for different bottle height by the up and down device. Nylon board is easy to change. It takes less than half an hour to change the changeable parts. Therefore, this machine is the best ideal choice for carbonated beverage and beer factories.
Bottle rinsing part: 4 nozzles
This parts has 4 heads which can be used for different bottles. It’s easy to operate. You just need to press the bottle. The rinsing process will be finished automatically.
Filling part: 4 nozzles
The filling part also has 4 heads. There are two modes for this filling process. One is automatic that you can fill beer into bottles with the 4 fillers at same time. Another is semi-auto that you can fill beer into bottles one by one. All the two modes can be operated on Screen.
Capping part: 1 head
The capping machine is made up of cap holder, capping slideway, capping upper part, capping lower part, elevating part and anti-circling column.
Vacuum solenoid valve
Side opening hole of air pipe. This way is the most important for the carbonated beverage and beer filling, which is specially designed for the high plato carbonated beverage and beer filling. This design can prevent from over quick of CO2 return to make much foam. This hole in beverage filling is all opened under the pipe.