Beer canning line
Beer can filling-sealing 2-1 machine is a filling sealing 2 in 1 machine designed combined with the actual situation in our country after the introduction and absorption.
It adopts isobaric filling principle and filling valve adopts high precision mechanical valve. It has advantages of fast filling speed, high precision in liquid level and realizing that it only starts to filling when there is a can, otherwise it will stop filling. Using the device structure of filling valve precover device plus supporting can bottom device, it can guarantee the maximum stability of cans when they passing in and out of the filling machine. Filling cylinder braces use worm-gear box going up and down to satisfy cans of different height. Float switches in the filling cylinder ensure a smooth liquid inlet.
The main transmission adopts gear transmission belt and gear box type exposed drive combination with advantages of high efficiency, low noise and smooth operation. It adopts frequency conversion steeples speed regulation and is controlled by PLC industrial computers. Sealing machine and filling machine are connected by hooks coupling universal coupling to make sure them a same working pace.
Production capacity(330ml CPH)
Filling rotate speed
|Number of filing calve:||8|
|Number of sealing valve:||3|
Accessory equipment for beer canning line:
This machine is specially design for empty cans. It carries the empty cans by layers onto the accumulations table so as to send the cans to the canning line.
This spray warm and cooling machine also named tunnel pasteurizer, which is different from the direct heat method (instantaneous sterilization), tunnel pasteurizer sterilize products and containers together, so that you can eliminate various possible causes of the growth of harmful bacteria within the allowed time.
1. This machine is applicable for drying the cans/bottles before labelling.
2. The wind direction is adjustable. The wind mouth can also be adjusted according to actual situation.
3. Almost every kind and size of bottles can be dried by this machine.
4. Low energy cost.
5. No easy-wear accessories or parts.
1. Suitable for a round bottlefront, back and neck label, flat and round bottles, single sided labeling, such as flat shampoo bottles and flat bottles of lubricating oil, liquid soap round bottle, wine bottle, etc.
2. Double the efficiency, which are widely used in chemical, cosmetics, petrochemical, pharmaceutical and other industries.